EUProduct ReadyMARKET-ACCESS PREFLIGHT
EN

Home & lighting

EU requirements for LED lamps and LED strips

Lighting has its own ecodesign and energy-labelling layer on top of CE. Low-voltage LED strips and smart Wi-Fi lights change which CE directives apply.

7Applies3Verify0Upcoming6TEST STANDARDS

Quick answer

LED lamps and strips usually need CE marking (LVD and EMC, or RED for smart lights), ecodesign compliance for light sources with an energy label and EPREL registration, RoHS, WEEE registration, GPSR traceability and an EU responsible operator.

Reviewed

RULE MAP

Which EU rules apply — and which usually do not

Status is for the typical product described on this page. Change one fact (mains plug, radio module, child users, app connection) and the map changes.

Applies

Ecodesign light sources (EU) 2019/2020 + energy label (EU) 2019/2015

Light sources need ecodesign compliance, an energy label and an EPREL entry before they are placed on the market; strips sold to consumers are typically light sources.

Efficiency, flicker, EPREL registration and energy label for light sources.

Applies

EMC Directive 2014/30/EU

Drivers and dimmers must meet lighting EMC standards.

Electromagnetic emissions and immunity of electrical apparatus.

Applies

RoHS Directive 2011/65/EU

Applies, including to drivers and controllers.

Limits on lead, mercury, cadmium, chromium VI, PBB, PBDE and four phthalates in electrical equipment.

Applies

WEEE Directive 2012/19/EU

Lamps and luminaires need producer registration per country.

Producer registration, take-back financing and the crossed-out bin symbol.

Applies

GPSR — General Product Safety Regulation (EU) 2023/988

Covers traceability, safe installation information and online-offer details.

Safety, traceability and online-offer information for consumer products.

Applies

EU responsible economic operator

Required for non-EU manufacturers.

A manufacturer, importer, authorised representative or fulfilment provider established in the EU must be named.

Applies

Packaging Regulation (EU) 2025/40 + national packaging EPR

Packaging registration per country.

Packaging design rules plus registration with each national packaging scheme.

Verify

Low Voltage Directive 2014/35/EU

Applies to mains lamps and drivers; a 12/24 V strip itself is below the range, while its mains adapter is covered.

Electrical safety for equipment rated 50–1000 V AC or 75–1500 V DC.

Verify

Radio Equipment Directive 2014/53/EU

Applies instead of LVD/EMC if the light has Wi-Fi, Bluetooth or Zigbee control.

Radio, safety, EMC and health requirements for anything with a radio transmitter or receiver.

Verify

RED cybersecurity — Delegated Regulation (EU) 2022/30

Applies to internet-connected smart lights.

Network protection, personal-data and fraud safeguards for certain radio equipment.

DATES

Dates that matter for this product

  1. GPSR applies to consumer productsIn force
  2. RED cybersecurity for connected radio equipmentIn force
  3. Packaging Regulation (PPWR) appliesIn force

TEST STANDARDS

Standards suppliers usually cite for this product

Harmonised standards give a presumption of conformity only in the version cited in the Official Journal. Ask for the full test report, not a certificate image.

  • EN 60598-1Luminaires — general safety
  • EN 60598-2-21Rope lights and strips
  • EN 62471Photobiological safety (blue light)
  • EN 55015EMC emissions of lighting equipment
  • EN 61547EMC immunity of lighting equipment
  • EN 62031LED modules — safety

COMMON BLOCKERS

Where sellers of this product usually get stuck

  • No EPREL registration, so the energy label cannot be generated and listings are taken down.
  • A smart strip is tested to LVD/EMC only, without RED radio tests.
  • Lumen and wattage claims differ from the tested data.

YOUR READINESS

Interactive readiness checklist

Tick what you already hold. Progress is saved only in this browser.

0 of 15 items ready
Markings and information to check before shipping
Documents to hold before the first unit ships
EPR registrations per country you sell into

Extended producer responsibility is national. Registration is usually required in every Member State where you place the product on the market, including by distance sales.

Plan EPR by country →

SUPPLIER REQUEST

Copy a document request for your supplier

Generated from this product profile. Items you already ticked are left out.

QUESTIONS

Questions about this product

Do LED strips need an energy label?

Usually yes. LED strips sold as light sources fall under the light-source ecodesign and energy-labelling rules, including registration in EPREL.

What is EPREL?

The European Product Registry for Energy Labelling. Suppliers must register labelled products before placing them on the market and use it to generate the label.

Is a 12 V LED strip covered by the Low Voltage Directive?

The strip itself is below the LVD voltage range, but the mains power supply sold with it is covered. GPSR then covers the strip’s other safety aspects.

CHECK YOUR EXACT VERSION

Run the scanner with this product preset

The scanner opens with these product features selected. Add your role, sales channel, market and the evidence you hold to get your own gap list.

Run preflight for this product →